|
|
Studying the behavior of concrete at high temperatures
Tillová, Jana ; Herka, Petr (referee) ; Bodnárová, Lenka (advisor)
This master‘s thesis is focused on the study of the behavior of cement concrete at high temperatures with a focus on monitoring the impact of aggregate and cement type. This work describes the processes in aggregates and cement matrix at high temperatures. The theoretical part describes the selestion of a suitable aggregate and cement for the surroundings with potential exposure to high temperatures. In the experimental part is given design of composition of a concrete with two types of aggregates and four cements. It has been suggested 8 recipes. Changes were observed densities, compressive strength and tensile strength in bending, calculate the velocity of propagation of waves with ultrasonic pulsed method. Also evaluated the appearance of the surface samples after thermal load – cracks on the surface and measure the maximum crack width.
|
|
|
The concrete with a higher resistance to high temperatures
Mikulinec, David ; Hela,, Rudolf (referee) ; Bodnárová, Lenka (advisor)
The result of this master’s thesis is acquaintance with the issues of cement concrete resistance to high temperatures. This work describes the processes ongoing in the structure of concrete at extreme thermal loads and analysis of effects of high temperatures on the individual components of reinforced concrete structures is given, then influence of high temperatures and fire on the aggregates, matrix, reinforcement steel and the resulting changes in their properties. In the experimental part is given design of composition of concrete with a higher resistance to high temperatures and subsequent verification of the physico-mechanical properties of sample of concrete after exposure to temperatures at intervals of 200 ° C, 400 ° C, 600 ° C and 900 ° C. In individual recipes were observed changes of volume weight, changes of compressive strength and tensile strength flexural , tensile strength of surface layers and the occurrence of cracks and then were compared the results of thermally loaded and unloaded samples. The benefit in this issue is to evaluate the surface appearance of samples after heat load - study of area of crack and measurement of their width - was used according to the methodology's authors Xing, Hebert, Noumowe a Ledesert given in Cement and Concrete Research. This methodology allows to quantify changes of surface, after temperature load.
|
|
|
Properties of concrete with cement matrix at high temperatures
Fiala, Jiří ; Dvořák, Karel (referee) ; Bodnárová, Lenka (advisor)
This bachelor´s thesis deals with the behaviour of the cement concrete at high temperatures depending on the aggregate and cement type. The theoretical part describes the processes in the concrete structure at high temperatures affecting the individual concrete components. The design of concrete structure with basalt aggregate and four types of cement in the experimental part was carried out. The proof of physical-mechanical properties after thermal load was reviewed, particularly change of density, compressive strength and tensile strength in bending. The X-ray diffraction analysis was carried out with prepared test samples.
|
|
|
Durability of repair materials with higher fire resistance for concrete structures
Počekajlo, Václav ; Dohnálek,, Pavel (referee) ; Bydžovský, Jiří (advisor)
This dissertation deals with the study of durability and degradation repair mortars for reinforced concrete structures. In its theoretical part, there are the research findings on the behavior of repair mortars exposed to corrosive environments with different exposure time and selected high temperatures. Processes occurring in repair mortars during their loading at high temperatures or when exposed to chemically aggressive environments are described, We can find recipes designed for cementitious binder based with a specific replacement using slag or fly ash in its practical part. The object of the research was to determine the durability of the proposed repair mortars, and determine their suitability for use on concrete structures, which may be exposed to a synergistic effect of chemically aggressive environments with high temperatures simulating fire.
|
|
|
Durability of repair materials with higher fire resistance for concrete structures
Počekajlo, Václav ; Dohnálek,, Pavel (referee) ; Bydžovský, Jiří (advisor)
This dissertation deals with the study of durability and degradation repair mortars for reinforced concrete structures. In its theoretical part, there are the research findings on the behavior of repair mortars exposed to corrosive environments with different exposure time and selected high temperatures. Processes occurring in repair mortars during their loading at high temperatures or when exposed to chemically aggressive environments are described, We can find recipes designed for cementitious binder based with a specific replacement using slag or fly ash in its practical part. The object of the research was to determine the durability of the proposed repair mortars, and determine their suitability for use on concrete structures, which may be exposed to a synergistic effect of chemically aggressive environments with high temperatures simulating fire.
|
|
|
Studying the behavior of concrete at high temperatures
Tillová, Jana ; Herka, Petr (referee) ; Bodnárová, Lenka (advisor)
This master‘s thesis is focused on the study of the behavior of cement concrete at high temperatures with a focus on monitoring the impact of aggregate and cement type. This work describes the processes in aggregates and cement matrix at high temperatures. The theoretical part describes the selestion of a suitable aggregate and cement for the surroundings with potential exposure to high temperatures. In the experimental part is given design of composition of a concrete with two types of aggregates and four cements. It has been suggested 8 recipes. Changes were observed densities, compressive strength and tensile strength in bending, calculate the velocity of propagation of waves with ultrasonic pulsed method. Also evaluated the appearance of the surface samples after thermal load – cracks on the surface and measure the maximum crack width.
|
|
|
The concrete with a higher resistance to high temperatures
Mikulinec, David ; Hela,, Rudolf (referee) ; Bodnárová, Lenka (advisor)
The result of this master’s thesis is acquaintance with the issues of cement concrete resistance to high temperatures. This work describes the processes ongoing in the structure of concrete at extreme thermal loads and analysis of effects of high temperatures on the individual components of reinforced concrete structures is given, then influence of high temperatures and fire on the aggregates, matrix, reinforcement steel and the resulting changes in their properties. In the experimental part is given design of composition of concrete with a higher resistance to high temperatures and subsequent verification of the physico-mechanical properties of sample of concrete after exposure to temperatures at intervals of 200 ° C, 400 ° C, 600 ° C and 900 ° C. In individual recipes were observed changes of volume weight, changes of compressive strength and tensile strength flexural , tensile strength of surface layers and the occurrence of cracks and then were compared the results of thermally loaded and unloaded samples. The benefit in this issue is to evaluate the surface appearance of samples after heat load - study of area of crack and measurement of their width - was used according to the methodology's authors Xing, Hebert, Noumowe a Ledesert given in Cement and Concrete Research. This methodology allows to quantify changes of surface, after temperature load.
|
|
|
Studying the behavior of cement concrete at high temperatures
Sovová, Kateřina ; Sitek,, Libor (referee) ; Bodnárová, Lenka (advisor)
Bachelor thesis is divided in two parts, theoretical and practical. In theoretical part are listed behaviour of cementious concrete at high temperatures and knowledge from particular construction, that was damaged by fire. There is given procedure of diagnostics for collected speciments of fire-damaged construction. In named analysis belong the carbonation depth through phenolphthalein solution and test of compressive strenght according DIN EN 13791 2008-05. In this study are demostrated results of tests, that were made on materials exposed to high temperatures. Result of constructions analysis is evaluation of economical reapairing works for safety. Practical part deals with measuring thermal conductivity at standard temperature and at high temperatures.
|
|
|
Properties of concrete with cement matrix at high temperatures
Fiala, Jiří ; Dvořák, Karel (referee) ; Bodnárová, Lenka (advisor)
This bachelor´s thesis deals with the behaviour of the cement concrete at high temperatures depending on the aggregate and cement type. The theoretical part describes the processes in the concrete structure at high temperatures affecting the individual concrete components. The design of concrete structure with basalt aggregate and four types of cement in the experimental part was carried out. The proof of physical-mechanical properties after thermal load was reviewed, particularly change of density, compressive strength and tensile strength in bending. The X-ray diffraction analysis was carried out with prepared test samples.
|
guest ::
